Solar House Number Light – Self-Charging, No Wiring

Integrated Solar Charging
The solar panel is built into the face of the number — it charges in daylight and needs no wiring, no separate panel, and no electrician. A 4–6 hour charge runs the light 8–10 hours overnight.

Automatic Dusk-to-Dawn Lighting
A built-in light sensor turns the backlight on at sunset and off at sunrise on its own. No app, no switch, no timer to set.

Three LED Colors on a Remote
Switch between warm white, neutral, and cool white with the included remote, and dim to the brightness you want.

Stainless Steel and Acrylic Build
Stainless steel body with an acrylic backing that creates a clean halo glow against the wall — the same construction as our custom illuminated numbers, not molded plastic.

IP65 Weatherproof
Sealed against rain, snow, dust, and UV, and rated from -20°F to 140°F for year-round outdoor use.

Floating Backlit Effect
Included spacers mount each number slightly off the wall, so the light wraps behind it for a floating glow at night.

Ready to Install
Ships with a paper drilling template, threaded mounting studs, and spacers. Tape, drill the marked holes, screw in, and mount — about 30 minutes, no wiring.

Size
8 inches in height (single number). One fixed size.

Finish
Matte black. One fixed finish.

Font
Oblivion. One fixed font.

Construction
Each number is built in four layers: a solar panel face that charges in daylight, a stainless steel body, an internal LED strip with rechargeable battery and dusk-to-dawn sensor, and an acrylic backing that diffuses the light into a clean halo glow.

Lighting
Three LED colors — warm white, neutral, and cool white — selectable by the included remote, and dimmable.

Power
Solar only. No wiring, no plug, no USB. A 4–6 hour charge runs the light 8–10 hours overnight.

Weather Rating
IP65 weatherproof, rated from -20°F to 140°F.

In the Box
One solar house number, remote, paper drilling template, threaded mounting studs, and floating-effect spacers.

Each number installs in about 30 minutes with just a drill. No wiring or power source to plan — every number is self-contained.

1. Position the template — Tape the included paper template to your wall where you want the number.
2. Drill the marked holes — Drill at the pre-marked points on the template. Works on wood, brick, stucco, metal, and stone.
3. Set the studs — Insert the threaded mounting studs into the drilled holes.
4. Add the spacers — Slide the included spacers onto the studs to create the floating backlit gap.
5. Mount the number — Secure the number onto the studs. Repeat for each digit in your address.

For the full illustrated guide, click here.

This item ships from our warehouse, typically within 2–4 business days. Delivery then takes 5–8 business days depending on destination and carrier. Each order is carefully packaged to arrive safely, and you'll receive a tracking number once it ships.

Because each number is a stock item, returns are accepted within 30 days of delivery for unused product in its original packaging. If your order arrives damaged, defective, or incorrect, contact us within 48 hours of delivery with photos of the product and packaging and we'll arrange a replacement.

Does it really work with no wiring or electricity?

Yes — there's no wiring and no plug. The solar panel sits on the front face of the number and charges in daylight, storing energy in an internal battery. At dusk, a built-in light sensor turns the backlight on automatically; at sunrise it shuts off. A full 4–6 hour charge runs the light for 8–10 hours overnight. Because the panel is integrated into the number itself, there's no separate solar panel to mount nearby or wire in — which is the main difference between this and a hardwired sign. If your installation spot gets reliable daytime sun, it runs itself year-round with no maintenance beyond an occasional wipe of the panel face.

What happens on cloudy days or in winter?

The internal battery is sized for a full night's run from a single good charge, and it carries a buffer for overcast days. In long stretches of heavy cloud or short winter daylight, runtime can shorten — that's true of every solar address light, since they all depend on available sun. For installations in low-light spots (north-facing walls, heavy tree cover, deep porches), a hardwired option is the more consistent choice. Our hardwired Backlit LED House Numbers run on a 24V transformer for steady illumination regardless of weather, in the same stainless steel and acrylic build.

Is this one number or the whole address?

This is one number. Order one for each digit in your address — a home at 1424 would add four to the cart. Each ships as a complete, self-contained unit with its own solar panel, sensor, battery, and mounting hardware, so they don't need to be wired together or connected in any way. Buying them individually also means you can replace a single number later if you ever need to, rather than the whole set. If you'd rather have your numbers pre-mounted together on one panel, our Metal Backlit Address Plaque ships as a single finished piece.

What's included and how hard is the install?

Each number comes with a paper drilling template, threaded mounting studs, and spacers that create the floating backlit effect. Tape the template to your wall, drill the marked holes, set the studs, and mount the number — about 30 minutes for a typical address, no special tools beyond a drill. It works on wood, brick, stucco, metal, and stone. Because each number is self-powered, there's nothing to wire and no power source to plan around. For full instructions, see our installation guide, or browse the complete solar house numbers and lighted address signs collection for other styles.